Leman Cross Plains Rifle .50cal - 07/22/21
Arrived safely! A Doc White, in the white kit gun. I've already started by inletting the barrel channel larger and then proceeded to bed the tang and barrel for a nice weather resistant sealed fit. Any tiny little wood splinters, I shaved or sanded away before bedding it. By the time its fully bedded, It'll be from the tang, all the way to the nose cap.
This gun uses an Austin & Helleck .50cal barrel with 1:66 twist. Maple stock is gorgeous! A lot of wood removal at the butt end of the stock, but that's a good problem to have. The lock panel will also need quite a bit of wood removed.
The pewter nose cap needed a lot of filing inside of the barrel channel. I got it close to flush with the wood, but that wasn't really needed as I was bedding the rifle anyway.
Just some shots I took today of the rifle. I'll post more as the build goes on.
[img]https://i.postimg.cc/Kz9PTWc0/218020025_10158705439472875_7010168916919112225_n.jpg[/img]
[img]https://i.postimg.cc/T1Fn7WDm/219738539_10158705440267875_4710965924705314220_n.jpg[/img]
This gun uses an Austin & Helleck .50cal barrel with 1:66 twist. Maple stock is gorgeous! A lot of wood removal at the butt end of the stock, but that's a good problem to have. The lock panel will also need quite a bit of wood removed.
The pewter nose cap needed a lot of filing inside of the barrel channel. I got it close to flush with the wood, but that wasn't really needed as I was bedding the rifle anyway.
Just some shots I took today of the rifle. I'll post more as the build goes on.
[img]https:/
[img]https:/