Anyone know where I can buy a wrench to remove the breech plug for an Omega rifle? I cannot seem to locate mine....

I used a 1/4 ratchet and socket on mine. Easier than the factory wrench.

I use a 1/4 ratchet and socket on mine also.

Agreed, ratchet and socket. Wildfowl, If I can find one of factory wrenches I can send it to you.

Thanks fellas. I didn't know if there was enough clearance with a socketbut I'll try that

3/8 sockets may be too thick, but 1/4 drive sockets work fine and the ratchet has better leverage than the factory wrench.

Make sure you don’t smack the stock with the ratchet whenever it breaks loose

Or your fingers!

in my musket kit i have a 1/4 inch ratchet and socket there cheap to buy if you get just a Jap set.

1/4 in. breaker bar and socket takes up less room than a ratchet. Harbor freight, Lowes, is your friend.

This, also saves the stock from ratchet head rash.