Home
Posted By: pacecars 450/400 Ruger No 1 - 01/17/24
This is a repost from the single shot section: I missed out on a Ruger No 1 in 450/400 with some ammo and brass the other night and was feeling a little bummed about it. The dealer said he had another one he was going to list and I made an offer and he accepted! I am starting to look for dies, brass and bullets and need to find a low power scope to put on it. I think I am going to try some cast bullets in it also if anyone has any recommendations as to what bullet or mold? This should be a fun gun


[Linked Image from i.postimg.cc]

[Linked Image from i.postimg.cc]

[Linked Image from i.postimg.cc]

[Linked Image from i.postimg.cc]

[Linked Image from i.postimg.cc]

[Linked Image from i.postimg.cc]
Posted By: pacecars Re: 450/400 Ruger No 1 - 01/17/24
I do see a red Pachmayer recoil pad in its future! If it shoots I might even have it case colored.
Posted By: Ky221 Re: 450/400 Ruger No 1 - 01/17/24
Always wanted one of these.

Very nice rifle. Congrats and Enjoy.

PS- I agree on the red pad.
Posted By: Puddle Re: 450/400 Ruger No 1 - 01/17/24
Happy to see you scored one!
Posted By: WyoCoyoteHunter Re: 450/400 Ruger No 1 - 01/17/24
Enjoy.
Posted By: GSPfan Re: 450/400 Ruger No 1 - 01/20/24
I have been shooting the Hornady 300 grain bullet in both my 450-400 and 405. IIRC I posted my load (reduced ) with H4895 in the single shot thread.
Posted By: rockdoc Re: 450/400 Ruger No 1 - 01/21/24
Nice rifle. Fun cartridge.

When I had mine I had a shotgun style safety modification ask the ejecting empties didn’t rebound back into the chamber. And a nice express sight rear blade.

Sometimes regret selling it!
Posted By: Mule Deer Re: 450/400 Ruger No 1 - 01/21/24
pacecars,

I used Lyman mold 410655 in mine, with a 92-6-2 lead/antimony/tin alloy. The bullets weighed 408 grains, and grouped pretty well with both Accurate 5744 and Swiss 1-1/2 F.
Posted By: hlg Re: 450/400 Ruger No 1 - 01/21/24
I've got Hornady once fired brass if you're interested.
PM me.Thanks
Posted By: JGray Re: 450/400 Ruger No 1 - 01/21/24
Originally Posted by Mule Deer
pacecars,

I used Lyman mold 410655 in mine, with a 92-6-2 lead/antimony/tin alloy. The bullets weighed 408 grains, and grouped pretty well with both Accurate 5744 and Swiss 1-1/2 F.

That's good to hear, John. I posted this in pacecars' other thread in the singleshot forum, but that's the same bullet I bought a sample of to try in my No.1 450/400. I've only used Trail Boss with it but have wanted to try 5744 and blackpowder as well.

[Linked Image from i.imgur.com]
Posted By: keekeerun Re: 450/400 Ruger No 1 - 01/21/24
What's a good range to sight in a big 400 gr. Bullet ,dead on at 50-75 yards?
Have fun with your new baby grin
Posted By: pacecars Re: 450/400 Ruger No 1 - 01/25/24
Originally Posted by JGray
Originally Posted by Mule Deer
pacecars,

I used Lyman mold 410655 in mine, with a 92-6-2 lead/antimony/tin alloy. The bullets weighed 408 grains, and grouped pretty well with both Accurate 5744 and Swiss 1-1/2 F.

That's good to hear, John. I posted this in pacecars' other thread in the singleshot forum, but that's the same bullet I bought a sample of to try in my No.1 450/400. I've only used Trail Boss with it but have wanted to try 5744 and blackpowder as well.

[Linked Image from i.imgur.com]

I will definitely give those a try. Might even try to find some paper patch bullets also
Posted By: pacecars Re: 450/400 Ruger No 1 - 03/08/24
Added the scope in QD rings. Waiting on the red pad to be added

[Linked Image from i.postimg.cc]

[Linked Image from i.postimg.cc]
Posted By: CZ550 Re: 450/400 Ruger No 1 - 03/09/24
Very nice!

Bob
www.bigbores.ca
Posted By: gunner500 Re: 450/400 Ruger No 1 - 03/09/24
Sweet single banger Pacecars, Congtats! you know, 350-400gr CEB BBW#13 flat nosed solids will do it all in that rifle, iirc Harry Selby even used 416 cql 400gr solids on Lion, he said they ddn't complain much LOL, ideally when Woodleigh gets back up and running their 400gr WeldCore round nose softs are a fantastic bullet, you can load that rig from spec to fierce, have fun.
Posted By: pacecars Re: 450/400 Ruger No 1 - 03/12/24
I am going to try some of the cast bullets and the lighter jacketed bullets for the .405 and work up some deer and pig loads
Posted By: Snowwolfe Re: 450/400 Ruger No 1 - 03/17/24
Beautiful rifle
Posted By: BRLMKR Re: 450/400 Ruger No 1 - 03/20/24
Pacecars, PM me.
© 24hourcampfire