Pierce SA
Broughton, SS, 26" #3
McMillan Rem Sporter, Edge filled in grey
Rifle Basix trigger @ 2.5 lbs
PTG BDL bottom metal
Pierce 1pc alum picatinny 20 moa rail
Farrell alum 30mm rings
Nightforce 2.5-10 with NPR1 reticle
Cerakote in black
Oh yeah! 6.5x47 Lapua
My loads.
140 Partition
41.6 gr Rel 17
Fed 205M
Redding Type-S FL bushing die with .289" bushing
2869 fps
140 Berger VLD
42.1 gr Rel 17
Fed 205M
2963 fps
.53 MOA
With all the above, I may be starting all over again. I should be getting the rifle back from the 'smith who built it. I had him take 1-2 " off the barrel shank end and "mid-turn" the action, all to remove weight. He was supposed to have shipped it to me 2 days ago. I post pics when I get it. I hope to start with roughly the same loads and have minimal load workups.
A lot of my rifles weight is in the 19 oz NF scope but I love that scope and don't want to mess with some thing so good. So, metal first. If I still don't like the weight, then I'll take a look at a Leupold.
Alan