Is coming, and hells coming with it......

I cant weigh.... it looks incredubly effishent and inherantly accurit.

Oh fuuck I just squirted coffee out my nose!!!! Haha

Guys will probably be asking questions about it everyday.

Ya reamer is in the works, snouts ordered up, actions getting snatched up..... don’t think it’ll disappoint..... it’ll spank the creed or br quite handily....

My bad, kreedmire

6.5 Diesel Burner?

Tag!

Oh schidt!

There is no 'r" in "Federica," Naomi.

Fredrica

Sure there’s is.

It’s FredErica. And yes I get ask daily. LMFAO.



Kinda like this, but it’s getting AI’d to a 40* shoulder.
If you guys want to be cool!! Scott Weichel will have my reamer, resize reamer and go gauge. he can and will make dies.
Looking like 3200 with 130 Berger in a 22”.

Ps everyone that’s cool pees their pants. 😀

If peeing your pants is cool.... consider me Miles Davis...

LMFAO

6.5 WSSMAI?

I'll ask again tomorrow....

case capacity.......

A reinvented Sherman Short?

DBM...........?

6.5 Windowlicker...

6.5 micklecky mudshark express

120 BT’s or 123 scenars would be a dandy buck killer too.....

Yes.
And no not a sherm

Wanted something for the daughters first rifle and the 7saum was shot out so. This fits well and should be kid friendly and I will not mind shooting it as well.

How's it differ from the SS?

The sherm short is a 7mm SAUM case that the gets pushed back .95 thousandth.
This starts with a 243 wssm and is set up to have an Ackley style positive contact at the neck shoulder junction. Makes it easier to fire form than a stupid faux shoulder it ends up with a 40* shoulder.

The 7 wsm next to a standard 6.5-243 wssm.

Copy....

Must have missed that you started with a WSSM case....

It’s what Winchester should have put to market instead of the 25 wssm.
If I get 130’s at 3150+ I’m canning the 6.5-284.

I did get a resize reamer to cut dies with as well.

"Just checking."

Sincerely,

Mick Dundee

😂.

Chick are always sutch good spelers.

+1

Nothing like going whole hog!

She she feeds efficiently....

Dummy rounds do with a 28* shoulder will see when it has a 40*.

1-10" twist?

Why would you go 10”?

Why would you spawn a new WSSM creation?

To fit in a Remington model 7 mag bolt face. That and new stuff is fun. It’s an 8.4 T. You can put a 10 twist on yours.

6.5 Susie Loves Rich with a 10 twist is high on the list.

6.5 Milford Midget Magnum....

Make mine a 7.7 twist to better slip atmospherics out to 2700 yards (on the windshield).

Haha via fixed 6 super buzzard

Them windows aint gonna lick themselves....

They’ll get plenty of help from the no buck killin do nothing crowd.... hint

2800 on the windshield it’s a +p model.

Less is soooooooooooooooooooooo much more... hint

Boolits matter more than headstamps........

Fred, a jowey woger sticker will net a extra 100 FPS... re hint

This is so much better than 6.5 wssm......

That's funny, right there! ....

😂🤣😂

6.5 Cumstain

Ok, no matter how hard you try. I absolutely refuse to name this after you so stop trying.

6.5 couchhound?

6.5 micklecky cock polisher?

6.5 MCS “ micklecky cheer squad “

6.5 GPMLF “gotta pm larry first”

6.5 shiithole Alaskan express

6.5 Indian reservation special

Shiit where’s it end???

6.5 Judwina?

6.5 smokeapole

6.5 Naomi??

Smoke we have numerous options, maybe we should do a campfire vote?

Awesome!! I like federica +p myself. Notice the spelling.

No it’s Fredrica!!! Grin

6.5 APE (Alaskan Pygmy Express)

Very nice, I like that, Fred will have final say, as its his baby....

6.5IBS..... Irritable Bushelor Syndrome

Oh I’m crying 🤣

6.5 CouchKunt...

Dog I ordered the barrel with cobwebs already in it so I don’t have to wait for it to match the rest of my safe queens.

6.5 sister La La.
6.5. Better BR.

Keep trying but nothing so far beats this ^^^

If only that pic would fit on the case head............

That has a ring to it. 😂

I sure hope he spells it right.

6.5Mm mmm.....

Highly unlikely.
But I know my weakness thank god it’s spelling and not a small dick. LOL. Dog knows what in talking about 🤨

1000 words right there............

6.5 MiniMe or MightyMouse

An unformed case holds 50 grains of RL 17. I’m sure 54 + once AI’ed with the 40* shoulder.

So about half way between a Creedmoor and a PRC?

Is WSSM brass still fairly available? Can’t say I’ve ever seen it, not that I’ve looked though. Looks fun.

It’s available now at most every retailer. This has been a plan for near two years. I was just waiting for brass to be available. I put four hundred in the loading room for this project. May grab 100 more.

I don't know about this...

That round looks like the recoil would permanently knock the hair off the top of
ya head if you were 4 ft 13 inches tall....or less

but on the good side, I don't think it would harm your Foo Munch Chew....

ya know, that thing on a face, the Drill Sgts said was a shock absorber for a high speed Cock Sucker?

My vote is to call it the Milford Midget Magnum...

does the WSSM stand for Winchester Short Stupid Manwannabe?

Inquiring minds wanna know... ya know...

Makes a model 7 Remington with a mag bolt face useful

The 3 word name that is all M's is kind of awkward. It doesn't roll off the tongue, so if one just called it the "M3" as in M cubed since I can't remember how to show the little 3 as being the "cubed" part. That will make it even cooler. You know, like the "Bob". Hope y'all don't mind me weighing in on this.

Imagine a new member , young lad - interested in gaining some knowledge on rifles/shooting reading this as his first thread . . . . . he would think - man I've got a lot to learn .

I didn't realise this was a serious thread until about halfway down the page . Cool ..

This thread is Campfire haute couture.

Mike this is serious, sorry folks derailed it....

There’s no shame in the colorful and creative presentation of a technically rigorous subject like cartridge wildcatting.

6.5 +P. It’s that serious.

+p++ even.

I sincerely apologise for any small part I may or may not have played in said derailment.

I would add, that it was mostly Jud so he should bare the brunt of the blame.

You gtg Jack!! Grin

Apologies accepted

Just for Steelie, call that bitch the 6.5 Washington State Sister Molester!

Haha oh fuuck!!!

😂

WOW +P++ I hope I never get on your bad side.

I like Milford midget magnum.....

Five more weeks the reamers will be finished

6.5 JB (Jumping Bear)

Top so far.

Most of my people think this is a close match to the 6.5x284. Can’t wait to see

When’s shiit gonna be ready to roll Freddy?

June I hope

What action/actions are you rebarreling Fred? For that matter, what's the entire blueprint?

6.5 “Triple F” Fist Fuuck’n Freddy
Kinda has a subtle ring to it 😎

LOL. The triple F I’m crying. 😆

First one is going in a Remington model 7 with a hightech stock. Going Mini M16 extractor bolts bushed and has Ptg pin. Barrel will be a 8.4t obermeyer it’s getting contoured Bartlein 3b with a [bleep] load of flutes. Going kiff DBM and running accurate mags. Timney trigger but a trigger tech will probably fix that.

This is the Donor



If it does what I am hoping then the next one will be a Winchester model 70 push feed.

Buffalo was a pet just the only pic I had of the donor rifle.

'Fredrrrrica'.

Just call it 'The Fred'- everyone will genuflect and pay homage.

The two rifles on the left will end up getting rebuilt.



And I will probably try to find another model 7 or two would be nice for the whole tribe to be shooting the same thing.

Some nice iron there. How long is the tube on #4 there, Fred?

29” plus a break. I sent the one on it packing. For a side vent made by Scott Weichel of live oak Precision.

The new brake

It’s a prototype I’m in love with it.





Can watch the 300 grain Berger at 2800 hit at 300 yards sometimes even at a 100.

Buff was a pet? 😂😂🤣😂 Please don’t ever adopt me.😳

Tasty collection of shoot’n Irons you have Freddy 👍🏻

Thanks.

Ain't that purty! A Dealer of Death is coming to the mountains soon...

I went the varmint direction for most of my custom builds...I wanted to enjoy more shooting out of my rifles that small fur provides with an abundance of targets...I only did 2 semi-custom builds on my big game shooters 300 Wby's with Lilja tubes and whatnots with stocks, actions slicked and muzzy breaks to protect my tender shoulder...Grin!.....My elk rifle, an older Sendero in 300 RUM I bought from a guy who added a wicked looking muzzy break to it. (can't figure out the name of the break; I think the guy said he had a buddy Gsmith make it) He only sighted it in and decided he didn't like the weight of the rifle...Sold it to me for cheap...I only bedded it. Dang rifle shoots as good as my Lilja tubes. I got really lucky I figured on the Sendero.

Fred, I've never wildcatted any caliber, unless you consider the 20 Practical I am building right now as one...But, there's plenty of them around, so, I am not making fire for the first time, as, I think you may be...Keep them pictures coming bitch! Love seeing what you are up to...Mark

Resize reamer shipped today so the plot thickens

Personally I think "6.5 Triple M" sounds pretty cool.

I wonder if the mag spacer kits from Patriot Valley would work there.

Hig I was looking at this one.
But hoping the 40* shoulder gives more body than pictured. In a push feed I may get lucky.

https://youtu.be/UW7BB7Gbnv4

Never dreamt of to much do room Good problem to have.

Did you run that kit in your dasher.?

No, I've been meaning to order a few kits. They were out of stock when I needed them, so I bought a few ARC mags. They've been running great honestly.

5 rd Accurate Mags would be nice though and are my go to in a few other set ups.

Update?

Had to send the reamers back to get recut the neck needs to be .301 and the resize .2965 that gives a .0005 neck turn. The
Necks from 243wssm brass are .022 and once bumped up to .264 run .019” the recut will allow for a slip fit on no turn or ..0005 with a thousandths off. I will most likely be taking.002 as the brass is thick enough and it definitely needs cleaned.

Damn you. Just took delivery of 6.5 Saum build. Have a model seven with mag boltface sitting around and I can’t believe I’m saying this but am considering a 223 wssm for pigs and critters smaller than deer after reading this thread

55s at warp speed and Barnes LRX for piggies sounds like fun...Ammo (and therefore brass) readily available

Reamers should be done this week and then the rifle should be done in a few weeks after that.

What bullet are you gonna run in the saum

I’m in the process of working out a load for the 156 eol

So far so good.

Very nice. 129 ablr for me. Nothing too exotic as 400 yards is as long as I can shoot. Out west on vacation now but hope to settle on a load when I’m back next week