After a very frustrating start getting the PPC zeroed in (I kept running out of left windage with both the S&B and Swarovski PH 6-24x50) A call to Steve at Bat Machine and another set of rings and Picatinny base were on the way to me. Here are the results of my reloads at 100 yards this afternoon:
N133, Barts custom 52 grain bullets, fed 205, Lapua brass
Considering it is not a bench rest rather more of a sporter build I am very pleased with the results.

Nice, one more click might get that vertical out.....

I have a Sako sporter and a custom Rem XR100 both in 22 ppc. Both are very accurate.
Sure looks like yours is a good one.

Yes Leroy and his Mrs over at Canyon Creek did a fine job on this one for sure !

H322 and LT 32 with the same primer and bullet will really hum.

I shot 18 groups with different loads, 52g bergers, and the agg was .292!

25g of IMR 4198 with a fed 205 won a benchrest match, agg was .189

Very impressive numbers Keith (I will save that load data as well) Thanks! I did measure a couple of those three shot groups and was pleased with a .102, .156 and a 4 shot group at .311 from a sporter type varmint contour barrel build and a 16 power optic I am happy.

Regards

Build specs? Can't beat the results.

Excellent accuracy.