Looking for info 1899 - 09/24/20
Long time reader, don't post much but appreciate the wealth of knowledge of all things Savage on this forum.
I recently acquired a Savage 1899 and would appreciate any information the experts here may be willing to share. Mostly interested in Model, date of manufacture etc. This gun is obviously not all original but I got it for an excellent price (plus 60 rounds of ammo) and I am more of a shooter than a collector so I am fine. This is my fourth 99, yes they are somewhat addictive
Details
Savage 1899 Model Takedown - missing takedown latch - space fitted with brass plate, doesn't look bad but.....suspect it may have been converted to non-takedown but I haven't tried to take it down and will probably just leave it alone.
Serial# - 28049X(1926?)
Caliber: 303 Savage
Barrel Length: 20 inches
Barrel Address: Utica, N.Y.
Front site: Integral with brass blade
Rear site: Buckhorn - suspect replacement as bluing does not match the rest of the gun
Rotor: Brass
Stocks: Straight grip, no cracks, obvious refinish, but match- schnable end front
Butt plate: Hard plastic, unmarked - pretty sure replacement
Metal - 80% no rust or pitting just worn
Lever case coloring - present but faded - 60%
No extra holes
Locks up tight and everything seems to work, have not fired yet but will when time allows. It appears to be 100% functional
Thanks in advance for any information.
I recently acquired a Savage 1899 and would appreciate any information the experts here may be willing to share. Mostly interested in Model, date of manufacture etc. This gun is obviously not all original but I got it for an excellent price (plus 60 rounds of ammo) and I am more of a shooter than a collector so I am fine. This is my fourth 99, yes they are somewhat addictive
Details
Savage 1899 Model Takedown - missing takedown latch - space fitted with brass plate, doesn't look bad but.....suspect it may have been converted to non-takedown but I haven't tried to take it down and will probably just leave it alone.
Serial# - 28049X(1926?)
Caliber: 303 Savage
Barrel Length: 20 inches
Barrel Address: Utica, N.Y.
Front site: Integral with brass blade
Rear site: Buckhorn - suspect replacement as bluing does not match the rest of the gun
Rotor: Brass
Stocks: Straight grip, no cracks, obvious refinish, but match- schnable end front
Butt plate: Hard plastic, unmarked - pretty sure replacement
Metal - 80% no rust or pitting just worn
Lever case coloring - present but faded - 60%
No extra holes
Locks up tight and everything seems to work, have not fired yet but will when time allows. It appears to be 100% functional
Thanks in advance for any information.