Bought a used 325C in .30-30. It was fitted with a Weaver side mount and an older 3-9x Bushnell. I did some bedding adjustment and installed a Leupold 2-7x. It shoots great and on a good day can do MOA for 3 shots at 100 yards. It loves Hornady FTX factory loads, and likes handloads using Leverevolution powder. Its favorite load is 170 gr Nosler partitions over a Leverevolutuion powder.
Best .30-30 I've ever shot.
sounds fun don't ya just finding a cool oldie!
Do you know what mounts I would use and where to get it. I acquired one but would like to put a scope on it, Thanks
I think this is what you want...
https://www.ebay.com/itm/1656474476...aQSdT1Ox7KipxY7Z0u3%7Ctkp%3ABFBM3P6VxctiMake sure your rifle has 4 holes drilled on the left side for a mount.
I don't think it does, I just checked and it has two together near the bolt in the rear and one ahead about an inch and down about 1/8". So it doesn't have 4, I looked at the one you sent and it is the right idea, but it won't work unless I can get Gunsmith to drill and tap it for me. Thank you for trying.
Those two holes are for a peep sight.
That's good to know, maybe I should find one of those. Thanks
You have an early rifle. The receiver sight in marked WFC 175. Screws for attaching are 8-40x3/16" oval head. If you go the route, make sure you know what an original looks like and that what you are buying has all the correct parts.
The receiver sight in marked WFC 175.
WFC - William Francis Cobb, but that's a whole nuther story..........