I made a knife with Purple Heart today - 01/06/20
$9.51 delivered for stainless steel blade a brass bolster..
https://smile.amazon.com/gp/product/B004GEI9IG/
![[Linked Image]](https://www.24hourcampfire.com/ubbthreads/gallery/80/full/117865.jpg)
I drilled out the pin holes from 0.096" to 0.250 inches.
I am out of brass pins, but I have some brass screws left over from my father working on his boat in the 1960s. The screw shanks are close to 0.250"
![[Linked Image]](https://www.24hourcampfire.com/ubbthreads/gallery/80/full/117866.jpg)
I found out that Purple Heart is hard to sand.
https:/
I drilled out the pin holes from 0.096" to 0.250 inches.
I am out of brass pins, but I have some brass screws left over from my father working on his boat in the 1960s. The screw shanks are close to 0.250"
I found out that Purple Heart is hard to sand.