Since I picked up two new rifles I am looking for bullet molds for them. Specially looking for a lyman 410663 for the 40-65 or any other make of mold that is the same. Also open to suggestions. Looking for 40-65 and 45-70 bullet molds. Our local BPCR club matches are out to 600 yards.
I don't have any molds for sale, but I do have a recommendation for your .45-70 mold.
The Lyman 457121PH is the best all-around bullet for me for both targets and hunting. While it drops at .456" with 20:1 alloy, genuine black powder will cause it to bump up, filling the rifling very nicely. It is a very accurate bullet in my Shiloh Sharps.
I have shot this bullet over 65.5gr of 2f KIK or Olde Eynsford powder out to 1,000 yards with great success.
There are so many good bullets out there for the .45-70, I wish you the best in your search!
Ed
Try posting on the Cast Boollits Forum, might be more productive than here.
I'm not here often but happened across your post. Cast boolits has a LOT of mold information but I've recently received three molds from Steve Brooks and they are some of the finest molds I've ever cast with. Take a look here:
https://brooksmoulds.com/index.htmlHe's also a super guy to talk to.
Art
I'm not here often but happened across your post. Cast boolits has a LOT of mold information but I've recently received three molds from Steve Brooks and they are some of the finest molds I've ever cast with. Take a look here:
https://brooksmoulds.com/index.htmlHe's also a super guy to talk to.
Art
I am over on the cast boolits forum as well and have been watching the classified ads. If I can't find what I am looking for I plan on contacting the custom mold makers and have it made. Thanks
If boogan is not interested in the 45001, I am.
mijo95,
I cannot PM you as you need 50 posts first.
My email is
[email protected]
I suggest Accurate molds out of SLC, UT. You can take an existing design out of his catalog and modify it to your exact specifications OR design your own. He'll make in either Aluminum, Brass or Steel.
wwwaccuratemolds.com
I suggest Accurate molds out of SLC, UT. You can take an existing design out of his catalog and modify it to your exact specifications OR design your own. He'll make in either Aluminum, Brass or Steel.
wwwaccuratemolds.com
He's made me several, made exactly what I asked for, and FAST.....