Let's see your AR rifles and/or pistol variants. Add a little description of what parts were used as well.

mine is a bone stock Noveske NSR Light Carbine

matched upper and lower though that dont matter much rest is a mix of parts thrown together.....

hmmm done some changes since that pic, will have to grab a new one tomorrow before it goes to live at my brothers while i pinball around the world....

A 16" dpms and a 20" Olympic arms.

some newer additions not pictured above

The one's I keep at my office

Waiting on stamps






I'll post pics of two more later.

Forgot this one

Another one

Here are a few of mine.

MA-10 PSCC by wareagle700, on Flickr

AR-15 16" RECCE by wareagle700, on Flickr

AR-15 18" Noveske SPR HDR by wareagle700, on Flickr

on the one on the right, i forget what the muzzle device is called but does it really work directing the muzzle blast down range? have thought bout it off and on but the price tag is high enough i havent felt like experimenting....

Noveske Flaming Pig - but there several knock-offs on the market now. It will make the flame "wave" with enough flash.

S&W M&P15
1" Battlecomp
Shaved FSB with a 15" Troy Alpha
Fixed DD sights with a TLR1
(It how has a Wyoming Arms Fenix PD35 I did a review of at 11 o'clock, same fixed sights and an Eotech set up for absolute co-witness)
VLTOR A5 and EMOD stock and Sprinco green spring
MOE-K Grip
SSA-E
BAD-ASS Ambi Safety with a short lever on the right side.
Gunfighter medium charging handle


Same lower
18" BCM SS barrel with rifle gas
15" Troy Alpha Rail
BCM BCG
Surefire brake
Leupold VX6 1-6 Firedot
-Switchview lever
-Wyoming Arms riser and Leupold QD rings

Looks like you need the next lower ring to me.

Yep.

That's a 13.7 Noveske Infidel upper with the KX3 perm - attached.

Two more�

Yep, I noticed that too. IIRC they're about a 1/4" higher than an LT104.

DD M4V7 with a 2-7X FFII in a Nikon fixed mount and a Geissele SSA-E trigger. My critter get'er piece.



PSA Premium Carbine with a Midwest Industries Gen II SS handguard, Knights Armament Micro rear sight, 1.5-4X Leupold European scope in a Burris QD mount and a Geissele SAA trigger. My home protection piece that doubles as a coyote (and wolf and ???) piece. It resides in north Idaho.



Both are light of weight and shoot as very, very well, frankly, equally well.

Especially how badly his scores suck...

LOL

Specs on both:

Aero Precision Lower
Spikes Enhanced LPK
Trigger Adjuster Screw
JP Enhanced Reliability spring set
WMD Nib-x BCG
BCM Gunfighter Charge Handle
Magpul CTR Stock
Diamondhead VRS-T 10.25 forend
Yankee Hill Low Profile gas block
DPMS A1 FH
DNZ Forward scope mount

Top 223 Wylde
Aero Precision upper
AR Stoner 16" 223 Wylde 1 in 8" Stainless Fluted
Nikon M223 3-12x42SF NP

Bottom 300 Blk Out
Aero Precision Slick sided upper(has the deflector but no FA)
AR Stoner 16" Lightweight 1 in 8" twist barrel
7.62 SASS Stainless A2 FH
Nikon Prostaff 5 2.5-10x40mm NP

PSA Lower with PSA internals bought complete, the rest I did myself

I guess I can play too.







One in the works.

Precision Reflex 6.8 upper with Doublstar lower.

Ill play.

How about the story on the Antelope? That has some unique characteristics. Hopefully it was put on the wall!

I like those accessories.

That's from a few years ago in Wyoming.
Fellow member huntr, a friend, and I, bought 4 does tags each for private property in unit 72.
She had cool horns like a spiders fangs, and was shot at around 400 yards with a handloaded 168 gr bthp.
Seems all the does had horns in this area. Just had to make sure there wasn't a black patch on the side of the jaw/head area.

And sadly no.
I had cut it for a euro mount and before it got boiled a neighborhood mutt running loose musta got it, or a coon or skunk.

BTT. You guys been putting any new ARs together? I finally got my favorite one set up how I like it now. Trying to track down my camera in my hunting gear and then I'll get some pictures up. Also, decided to try out a PSA upper and got one of those on the way. Looking forward to trying that one out.

I was gonna play too, but just lost all my guns in a boating accident last weekend... LOL

You guys take way better pictures than me, but here are a few:

16" 5.56 with Leupold Mark AR scope, and a PSA 308 (have since mounted another Mark AR scope on that one)

How are you liking the PSA 308 build?

It has pros and cons; overall I'm pretty happy with it, especially considering the price, but some of the issues might be a deal breaker for other people.

The upper/lower fit is looser than I hoped for, the bolt catch hole is too small for the roll pin, and the chamber was a bit tight. PSA probably would have fixed the chamber, but as a gunsmith, I just did it myself.

It shoots well though; initial load workup this weekend delivered several groups under 1/2" with 150gr and 168gr BT's, and reliability has been 100%.

All said and done, I've got a sub-moa 308 AR that's reasonably light weight (10.2 lb with a 3x9 Leupold installed), produces about 150 fps higher velocity than my PTR-91, and cost just under $1000 before the scope.

I posted pics of my AR several months back but I'll post it again just because I love this rifle.

Seekins billet upper/lower
Magpul furniture in OD green
Geiselle SSA-E trigger
MI Gen2 SS 1 piece FF handguard in OD green
SWS 16" melonite barrel
WMD bcg in OD green
VG6 Precision Epselon 556 compensator

Ak, what type of optic are you running on that? That build turned out very nice! You reloading for it?

Right now I'm running Magpul open sights (flip ups) but want to put an optic on it. Not really sure what to get because I want to use it for hunting as well as HD.

I don't reload so right now I'm shooting factory stuff, though I have been seriously considering taking up reloading because my wife loves to shoot and I get the feeling once she shoots this AR, she's going to want one of her own. Thanks for the compliment bear.

Noveske #2

What every AR wants to be, full auto....

Is that what you would call boob weld?

That's a Montana milkshake....grin

bacon and eggs...dig the camo tape...

Toad, lookin' good. Been busy over the winter, have ya? Me too..

sorry, I missed your reply. yea, pretty busy. the wife evicted my gun stuff out of the spare bedroom to the unheated garage, so I gotta pick nice days and bundle up to go putter on the guns or reload. right now I'm in the middle of reloading 5K once fired LC brass on a single stage press, and swaging the primer pockets on the Dillon gizmo.

Your scopes gonna fall off.

yea, I know...only 21 screws dedicated to bolting optics to rail.


but I do like the riser.

jimmyp, You sneaky left-handed [bleep]. What else you hiding in your garage?

Damn, toad. I hear ya. My guns are on par with food. Anyways.. what kind of brass you need? Only .338? I've got a few 9mm, .38 spcl, .40 sw, and .45 auto brass (not cleaned and not ss tumbled). pistol brass laying around.

Got a bit of smithin going on right now. Need to fund..