Need help figuring out what part I need. My sling will not completely rotate due to spacing issue. As you can see in the pictures below the sling is hitting the side of the pistol brace. . Is there a spacer or an attachment I can get to give me more space between the sling QD stud and the hole that connects it to the pistol brace??? Any suggestions would be greatly appreciated.
Thanks!!
Maybe an angled QD sling stud like one of these:
http://shop.talltimbertactical.stor...avy-duty-quick-detach-angular-attachmentBut it looks like you have the Magpul with the QD swivel sewn into it.
TRIROCK Trircok QD Adapter Sling Stud and a GrovTec Push Button Base to Stud Adaptor would adapt it, but I don't know how sturdy it would be.
The angled stud looks like it would work. I'll ask the wife if she can re stitch it back up. Thanks!!
I have another question, I want to put a QD mount on my m-lok rail. . I prefer the one that does not have the anti-rotation lock on it. I can't seem to find one that doesn't lock. Anyone know the technical name for a full Rotating non anti-lock mount??
An imported Air-Soft knock-off...
Seriously, you're going to be hard pressed to find a full rotation front sling point - most are set to only rotate 90 degrees - or less.
If you find one, do take the time to make sure it isn't an Air-Soft part - there are a few dealers that won't put the fine print in the ad.
Looking at Yankee Hill, they may have one:
https://yhm.net/m-lok-q-d-sling-swivel-mount.html
Most of us don't want the sling swivels to rotate, and most of the better quality parts are designed with that in mind.
ALL of them just piss me off....noise, rotation, etc....I’m back to 550 loops. Quiet, cheap, easy enough for on/off....for me. Might find a soft/quiet loop attached to the stud?.... best of both worlds, in my mind.
OP,
GrovTec manufactures M-Loc full rotation & 1/4 rotation QD adapters.