My Lab Radar took a dump today. Also last Sunday. When temperature gets to 90 degrees I get a flashing blue light and it quits working

I have 2 battery packs both do the same thing. Anyone have this problem? Guess I,ll have to send it in. Looking for ideas.

You in the wrong house, dumbass.

Go over to DU and ask your anti-gun buds.

Both battery packs are fully charged, I’m assuming?

Make sure the battery packs you are using are correct for the unit. They require specific voltage.

Try a different memory card. My blue light was flashing when I used an incorrect SD card. From the LabRadar website: The flashing blue light on your Labradar indicates the SD card is not compatible. It must be 32GB or less, SD or SDHC. Micro USB cards are not recommended. Do a FULL Format of the SD card using FAT 32 and try the card again.