Quickload for IMR 4895 and 30-06? - 07/14/10
Would someone be kind enough to run this in Quickload for me?
Remington 7600 18.5 inch barrel
30-06 Sprng.
RP Brass, CCI 200 primers, 49 grains IMR 4895, 165 grain hornady BTSP. OAL to bullet tip (3.28 inches).
I know IMR 4895 is not the "best" for 165 grainers in the 30-06 but my rifle loves this combination. Was curious what Quickload says in terms of pressure, etc.
Thanks a lot!
Remington 7600 18.5 inch barrel
30-06 Sprng.
RP Brass, CCI 200 primers, 49 grains IMR 4895, 165 grain hornady BTSP. OAL to bullet tip (3.28 inches).
I know IMR 4895 is not the "best" for 165 grainers in the 30-06 but my rifle loves this combination. Was curious what Quickload says in terms of pressure, etc.
Thanks a lot!