Did Winchester ever have the 94ae in 375 Win?
Or did they stop making the 375 before the change to angle eject?

After doing lots of searching, apparently they made a few 94ae's in 375 Win. 1983-ish, only made one year when the AE's started and I think the 375 ended, but I see conflicting info on the year the 375 was discontinued. I've seen ending dates of 1983, 1984, and 1985 mentioned. But the 94ae 375 Win had the raised Monte Carlo stock instead of the straight comb stock. A few pics around the net, and even a classified ad here on 24hrcf from 2011 for that very gun.

If anyone knows of another, I'd be very interested to find one.

Here's one

http://www.gunbroker.com/item/716119850

Saw that, thanks. Good timing I guess, too bad there's some light pitting on the receiver.
Beggars can't be choosers...

......aaaaannnd that one is on its way to Wisconsin. It will be well-cared for.

I always wanted a big bore!

Interesting rifles. Mine is an early model. I use 38/55 Winchester brass trimmed to 2.080. if they grow to 2.090 then can feel them touch the chamber end with finger pressure. My normal load is an NEI 220 grain gas check at 2150. Pretty good hammer...