My 7mm-08 with 140 Accubonds over 44 grains of RL-15 is at 2780 fps, with absolutely no pressure signs. This is way low of the web-site data shown below and I felt I should be able to exceed 2780.

So, after viewing this site...
http://sed88.tripod.com/rem7/peth.html, which maxes out at 44.5 grains of Varget with 140 Nosler BTs for 2950 fps, I slowly went up and stopped at 46 grains for about 2850 fps and still no pressure signs. I wasn't trying to get to 2950 fps.

I haven't measured, but I attribute this to an oversize bore diameter.