That was then. Remington offers no such service, BUT all you need for a bolt on job is a trigger plate, lever, and stock. I would not guarantee a drop in with Remington parts, they may have gone to new dimensions with the new machinery.
The cheapest way out may be to buy a straight grip .30-30 and swap the parts then sell the doner. I was going to do that to make a straight grip .35, but one had the serial no. on the trigger plate, the other on the top tang. That would have resulted two serial nos. on one rifle and none on the other.
Best wishes,
Jack
Last edited by jt402; 01/08/16.
"Do not blame Caesar, blame the people...who have...rejoiced in their loss of freedom....Blame the people who hail him when he speaks of the 'new, wonderful, good, society'...to mean ,..living fatly at the expense of the industrious." Cicero
| 
