WiFowler,
For those of us without a tool to measure the exact seating depth, is it acceptable to use a selected bullet in a fired case that just enough neck tension to keep the bullet from falling back in the case, but not so much that it is jammed & stuck in the lands?
Then, closing the bolt on that round, withdrawing it and measuring COAL?
That's the only way I have to do it. I realize that most bullets will vary slightly due to nose damage, etc., so it's not the most precise way to go about it.
Ed
Perfectly acceptable way to do it and can be just as accurate. Still using the bullets ogive to get the length that way so tip damage doesnt matter.
