Yes, I have a level on it.
We learned a valuable lesson on wind direction.
I'm running a stainless fluted barrel, I bought off Tanner, and fitted it to my old 8mm Rem Mag/300 RUM action.
When it screwed tight, the flutes were off, and it had to be reamed again.
Took a bit off the shoulder to line up the writing and flutes, and cut a new chamber and throat.
I'm running 1 grain over max, of rldr 22. 66.0 grains.
[Linked Image]
My action was opened up, and I have a wyatts mag box in it. Scope base screws are now 8-40's, and bolt has been fluted.
Oh, and a mcswirly.
[Linked Image]

Last edited by splattermatic; 05/20/16.