Started today with a clean bore and the Precision Rifle QT .50/.40/250 saboted bullet seated quite easily. It was also 8" high at 100 yds. Second shot from a fouled barrel dropped right into the 10 ring but I noticed that it was not quite seated as deeply as the first shot. This using 2/50 of 777.
I have it figured out that I can kill deer to about 150 yards with this thing and the load I'm using now. Today was my last opportunity to shoot before fridays deer opener.
I do intend to try BH209 after the season ends. But cannot switch before the season. Is there anything I can do to seat this load without hammering on it?
Last edited by johnw; 11/15/16.
