Originally Posted by RWE
Originally Posted by Jason280


I found a few online, but their description has me a little hesitant to order. I mic'd my barrel, and it comes out at 0.580" in diameter...they list their sight as fitting 0.560".



So your barrel is 0.58" and the part 0.56".

a dowel rod and some sand paper makes that happen....


+1 on the dowel rod, remember it's a press fit and 0.02 isent much metal to work with, plus I'm sure the pot metal will streched alittle. Don't want it to just slide on with finger pressure, as it will shoot loose