I'd say you are in the ballpark, and it sounds reasonable.
I've seen standard pressure data that uses 5.0 Unique max with a 130 gr, and I've also seen 5.6 max, but anytime you change a component it puts you in unknown territory.
If it were me I'd do what I always do and start at 4.5 and work up using my chrono to quickly find out where I am at with a particular bullet and can of powder...maybe 10 rounds to figure it out.
1000-1050 seems like a good safe target velocity to hit with Unique at standard pressure. +p is higher.
I've played around quite a bit and never blown a 9mm case, but I still test loads near the top with the mag out.
You posted this in the software section so maybe a reloading question isn't expected here, and you may get more input from the Handgun forum.
