I took it to the range. Before the "repair" it would regularly fire five Yellow Jackets into 5/8". After the "repair" it will fire five Yellow Jackets into a patter of 5".
By the way, Kp321, this rifle had a modified extractor that extracted unfired rounds and just wore out.
I'm going to have to call complete, and utter bs.
1) Ain't no way yellow jackets are going to group 5/8" at 50 yds.
2)Ain't no way you ran bricks of yellow jackets through a match chamber with no problems, and now have failures to fire and extract. Because, there's no way you can get through 100 rds of yellow jackets without a failure to fire.
3) Ain't no way after a slightly cleanup in the chamber a match 22 barrel is going to shoot 5".
I did have a green mountain match barrel for my 10/22 that was very fickle about feeding and ejecting and the accuracy was only slightly better than the factory barrel. Sent it back to Brownells, got a Clark match barrel and now it'll feed and extract anything I feed it, and 10 shot 50 yd groups are a bit over 1" for bulk fodder and 1/2" for preferred match fodder.
