I'm in a bit of a pickle here...finishing up a session of about 800 hulls or so, I ran out of International Clays so I figured I'd finish up the last five or six boxes using some Universal Clays.

In my spreadsheet, I found this recipe:

STS hull
Rem. 209 primer
Fig.8 wad
1-1/8 oz. payload
Universal Clays 24.0 grains

So, just to be cautious I decided to verify this load...and I can't find it anywhere. I have the Lyman 5th edition shotshell manual and I've looked at the Hodgdon website. I even looked at a webpage I saved way back when, and the load is not shown with Remington primers. So now I don't even know where the recipe came from (I recorded it in my spreadsheet five or six years ago).

Is there a more extensive data source that might have what I need? I'm pretty sure---but not absolutely positive that I used this recipe at one time and had no issues with it...but I sure would like to be more confident before proceeding with it.

Thanks in advance.

Don't be the darkness.

America will perish while those who should be standing guard are satisfying their lusts.