Originally Posted by Redneck
Originally Posted by ajmorell
Originally Posted by Bobmar
The one exception I know of, was the 3 inch magnum Remington 1100. The shorter shells wouldn't cycle the action correctly.


That has little to do with the shell length, and FWIW I shoot 2 3/4" load through my 1100 magnum all the time. They cycle fine if they are heavier loads.
Beat me to it.. The high-base 12 ga stuff in 2 3/4" hulls will work just fine..


Yea, my 1100 will not cycle low brass trap loads. However, a high brass 2 3/4" will. It's got to be high brass. The other thing is that you have to keep the outside of the magazine clean with a good or new o-ring.

"Government is not the solution to our problem, government is the problem."
Ronald Reagan