Tres,
I like your recommendations/instructions and appreciate the time you have taken to share them with all of us. Question about finding the seating depth of a particular combination. What do you think about using the bullet and a fired brass with the neck dinged down to hold tension on the bullet as it slides back into the brass when cycled into the chamber and then carefully backing it out and measuring with a comparator?
Thanks
Dave
The problem with a comparator is where the bullet makes contact with the rifling is another dimension vs a comparator that doesn’t change. As throats erode the dimension changes. So after say 100 rounds it has to be checked again. These reloading companies really market certain items like bullet comparators which on compare bullets for similar o gives not COAL.
