...
JCMCUBIC, what powder idi you use with the ABLRs?
...
I used 26.5 gr of H4895 in neck sized brass. It's Nosler's listed max load (
https://www.nosler.com/65-grendel - under 130 grain bullets) but since that should be AR data, I just started (and ended) with the max load. I don't usually do that, but considering 6 ARC bolt vs AR listed loads I was fine with it. Bullets were seated longer in JO's bm/mag box which likely increased the cushion on any pressure worries. It's not a worked up load, just a thrown together and sighted in. Later this spring and summer I'll play with it. There's likely a fair bit of performance left, both velocity and accuracy wise, thought I'm not a "speed is everything" guy.
