So I've been having some issues for a while with a 6mm-06.
I used to shoot it quite a bit. Put it up for several years, and when I got back out. It was blowing primers. Checked everything I could. All I found was some light rust in the chamber. Cleaned it, backed loads off 2 grs. Still blowing primers.
After that I took it to a gunsmith who checked headspace, cleaned everything, and re-crowned the barrel. Brought it home this week. 2nd shot it blew a primer.
So if anyone could run a check on Quickload, for a 6mm-06, 105gr amax, and Reloader 22 powder. I'm using Winchester LRP, and Remington Brass. I would appreciate. Just give me a range to work in.
Thanks for any help.
