One last note or two....
Do not mess with the sear engagement screw unless you are 100% sure you know what you are doing. You can get very crisp pulls with minmal sear engagement, but too little sear engagement can be dangerous.
Also, the trigger lever must always return under the sear in a very positive manner. If it has any slop as it gets close to being in position, it is a recipe for disaster.
Lastly, the over travel must not be too limited--that too can cause problems.
Once again, if you can get down my way, I'll glady show you how to adjust these things and let you shoot my 416.
Blaine
