EDMHUNTER,
How about some spec's on that awesome 300 Win. mag!!?
Blueprint your receiver
Install Lilja 30 cal, 1-10� twist, approx #4 contour, 26� finish
Hand polish barrel ripple free
William�s extractor installed, modified so a round can be dropped into chamber, and bolt closed
Re-contour tang
Build up and checker bolt release
William�s 1 piece bottom metal, SS
Shorten factory box for use with bottom metal
Stainless bolt handle installed, longer with less sweep and built up root.
3 panel checkering 30 lines per inch
Re-cut loading port, and cut side of bridge for ejection clearance
Drill & tap for 8 X 40 screws, Talley rings & bases stainless, 2 pairs of rings
Fit bases to receiver, Polish & de-burr rings
Polish mag follower
Jewell bolt body
Trigger re-pinned, sears surface ground & polished. Safety wing timed properly
Install Echols stock, 14� LOP, machine screw swivel studs front and back both
Paint stock
Misc. polishing of action for smoother and reliable function
Mount scopes
Range test
I forget how to post pictures if someone could tell me how I will post them. You will not be sorry using Mark. He is one of the best gunsmiths in the country.
