Here's an update on the ruger hawkeye trigger adjustments. The diagram for the mkII on centerfirecentral.com will work for the sear notch area. I just did mine, but left .021" bearing surface just to be safe. I polished all bearing surfaces and bolt face engagement area. The "trigger" was pretty good except I beveled the trigger sear engagement area with some 400 grit sandpaper at a 45 degree angle @ around .003" (doesn't take much). I put everything back together and it is very impressive now. Smooth, no creep and around 2.5 pounds. You don't even need the lighter spring. Very comparable to the Timney on my m1917 if you can believe that. Remember, do this at your own risk and use the proper tools (depth gauge works great). I will not be held responsible for a job gone wrong. Thanks, Chief
