Suggestions please...

I have a Winchester Model 70 push feed WSM that has turned out to be a real shooter but I have a issue. I have a Leupold VX-2 4-12x40mm adj. obj. sitting in Talley steel mounts. The rifle is fine with left/right adjustments but I've ran out of adjustment on elevation and it's shoot 13" too high.

Any ideas as to what to try? This rifle has become a sweet shooter.

Here's a 3 shot - 100 yard group from yesterday (the squares are 1"); [Linked Image]

I had Lee (Redneck) bed, fit to stock and convert from a blind magazine to williams bottom metal. He also adjusted the Timney trigger that I put in it. He turned it from a fair shooting, hard kicker base line model to a great shooter, mild recoiling beauty., but I have to get it "DOWN" a good bit unless I plan on shooting deer at 600 yards!

Here's the rifle; [Linked Image]

This is the scope; http://www.leupold.com/hunting-and-...-ii-riflescopes/vx-ii-4-12x40mm-adj-obj/

Here's the rings; http://www.talleymanufacturing.com/cgi-bin/public_controller.cgi?view=products&category_recnum=3



Enjoying Each Sunrise...