Why? What you have is essentially new brass after the ultrasonic cleaning....I never lube necks on "new" brass anyway. Am I missing something here?
Sort of.
New brass is not squeeky clean like these will be. Unless you use a Carbide sizer ball, most people who use FL size dies lube the inside of the neck to keep the ball from screeching as you retract the FL or partially neck sized brass. I usually dip the end of the neck into my RCBS foam pad to leave a ring of lube on a piece of brass, sometimes every other case, sometimes less on smaller calibers.
For those that use collet or bushing dies there is no wet lube in the sizing process, and most, I believe, dry lube the necks for consistent release of the bullet.
My question isn't "do you", my question is "those that do dry lube, which brand/ method do you prefer".
Allen
