The next step is to cut out the sight window and shape the grip. I drew the window onto the tape on both the back and belly of the bow. The window will be 1/8th inch less than center.
I used a hand saw and chisel to remove the wood.
And then sanded it to the lines.
I put a crown on the shelf.
To shape the grip I used a wood rasp and sanding blocks
It still is a bit thick and will need to be slimmed down a bit.
[img]
http://i28.photobucket.com/albums/c239/212007154/josh%20bow/riser7.jpg[/img]
[img]
http://i28.photobucket.com/albums/c239/212007154/josh%20bow/riser8.jpg[/img]
[img]
http://i28.photobucket.com/albums/c239/212007154/josh%20bow/riser9.jpg[/img]
The end user is happy with the fit so far.
[img]
http://i28.photobucket.com/albums/c239/212007154/josh%20bow/riser92.jpg[/img]