Home Forums Hunting & Shooting Bowhunting Leather side quiver build-along

I stained the quiver with a mixture of dark brown and oxblood to create a burgundy. I added about a tablesthingy of this mixture to a pint of denatured alcohol. I did not want a dark stain but rather an antique look and I know the neatsfoot oil will darken the leather even more. Once the quiver was dry (blow dryer assisted) I applied brown edge kote to all the exposed edges of the leather. Once it dried, I polished it with a piece of bone.



The next step was to return the oils to the leather that were lost during staining due to the alcohol and blow dryer. Without this step, the leather would crack when flexed. As you can see by the buckle on the right, the oil has a darkening effect on the leather.



After a few hours sitting in the sun, the oils had soaked in and I applied a coat of mink oil to further moisten the leather and to waterproof it.



The burgundy was a good color choice for this project.







[img]http://i28.photobucket.com/albums/c239/212007154/josh%20bow/quiver9996.jpg[/img]

The end user seems satisfied.

[img]http://i28.photobucket.com/albums/c239/212007154/josh%20bow/quiver99991.jpg[/img]

[img]http://i28.photobucket.com/albums/c239/212007154/josh%20bow/quiver99992.jpg[/img]