NRA, a couple things regarding your last post. The Lee website is correct in a sense. You can neck size only for a bolt gun as long as you are only shooting that brass in that one gun. Neck sizing will work the brass less resulting in longer brass life. After shooting the brass several times that has been neck sized only, you will need to full length size because you will find that the bolt will be really hard to close.
As far as the presses, any of those you listed will do a fine job. And yes any of those presses will load all the calibers mentioned by adding the correct dies and shell holders. The one press I might mention is the Lee Classic Turret. Make sure it is the Classic Turret!! Loading pistols can get real old loading on a single stage. The Classic Turret has an indexing rod the will rotate the turret making for quick work on those pistol loads. It can also be removed for single stage loading while loading your Swift or 06. If that press interest you any have a look at Kempf Gun Shop on the web. They have some pretty decent kits.
