I didn't have any luck with the Accubond 130's either but got 3150 fps and 1/2" 3-shot groups @100 yds. with 57 gr. H-4831 and the 125 gr. Nosler Partition. All I heard was that the Partition didn't hold a candle to the Accubond but each rifle is it's own animal. Mine is a custom Mauser 98 with a 24" 1-8.5" Shilen barrel. I shot a little whitetail with this load last year and it went about 5 feet. I was using Winchester brass formed from .30-06 and a Remington 9-1/2 Standard Large rifle primer. 3.355" oal.
I noticed that this old Hodgdon manual had some loads that differed from later info by as much as 6 grains of H-4831. I recently tested some of the other loads using 120 gr. Speer Hot-Cor's. Did some work with the 140 grain bullets as well as 129 grainers. Can send you some loads but you'll have to use caution. I found 57 grains H-4831 was as much as I could go with
the 125 grain Partition without seeing slight cratering around the firing pin mark on the primer.
