To start with, you choice for a rear site sucks and blows. You need a peep of some sort.
For a front site, just pick front base easy enough to solidly install, then order some plastic test posts from XS sights. Go to the range and just keep whittling on a test post until you have a good zero, then measure its height and call up XS and order a dovetailed steel "white-stripe" front sight and drift it in place. Once you get it zeroed/checked, then dribble a bit of loctite green in the dovetail. It won't be going anywhere without a torch.
Last edited by Take_a_knee; 08/03/14.
