The trick is to press down on the sear while turning the sear engagement screw clockwise. When it just trips off loosen it up 1/8th turn. Do it a couple times to get it right on. Your creep is now gone. Then put it through the full safety checks. No need to stone or polish anything. If you want to get under 1 1/2 or 2 pounds it will go as light as 6 ounces with a spring change. None of the aftermarket Weatherby triggers are an improvement over the factory Mark 5 trigger. I defy you to tell it from a Jewel once it's adjusted up.
I currently have 3 Accumarks. The are my favorite factory rifle and favorite factory action to build on. I make my living off Remington's though. Never a shortage of those that need work.
Great Read Thanks
