Wait, 1/2x24, 1/2x28, or 5/8x 24 threaded? 1/2x anything on a .357, leaves only around .007" of metal between the threads and lands....if my figuring is correct, something seems ????
I was crystal clear that the barrel was threaded 1/2X28. Which is the same thread pattern as a 9mm barrel. Because you are going to use a 9mm suppressor on it. Or you can use a three lug adapter on it and use a three lug 9mm can. Your "figuring" was not asked for, nor is it close to correct, mathematically---but thanks though.
