Home Forums Reloading Reloading Software QuickLoad propellant table & shot start pressure problem

Dirk

On the propellant table,
set the sliders to the slowest and fastest settings,
then exit and go to the TB powder and set the grs wanted,

I used 20grs and had No problems, using the Saami 308 caliber w/150gr FMJ bullets,showed a 124% full case.

Start pressure was set at normal setting of 3626 psi.

If you hold the pointer over/on the start pressure box, QL will show you various start pressures for the bullet types etc.

Tia,
Don