|
Joined: May 2003
Posts: 5,793
Campfire Tracker
|
OP
Campfire Tracker
Joined: May 2003
Posts: 5,793 |
Help me out here. In every description of the various versions of ladder and OCW load development methods I have seen, conventional wisdom says to ignore any horizontal distribution and attribute it to wind. We all know barrels oscillate upon firing but what law of physics makes them only oscillate in the vertical axis? Why don't they oscillate in the horizontal axis too? Or in a combination of vertical and horizontal axis? And, if that is the case, why are we ignoring the horizontal dispersion in ladder and OCW type load development?
Thanks,
John
If my people, who are called by my name, will humble themselves and pray and seek my face and turn from their wicked ways, then I will hear from heaven, and I will forgive their sin and will heal their land. 2 Chronicles 7:14
|
|
|
|
Joined: Nov 2011
Posts: 2,948
Campfire Regular
|
Campfire Regular
Joined: Nov 2011
Posts: 2,948 |
That's a good question. It would be hard to ignore much horizontal on a calm day. I've heard the same...let's see if anybody has anything on this.
|
|
|
|
Joined: Jan 2006
Posts: 4,700
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2006
Posts: 4,700 |
Been saying this for years personally...
|
|
|
|
Joined: Jul 2009
Posts: 8,923
Campfire Outfitter
|
Campfire Outfitter
Joined: Jul 2009
Posts: 8,923 |
Been saying this for years personally... Since you are glued to the hunnert' yard line, you can ignore both
Dave
|
|
|
|
Joined: Jan 2006
Posts: 4,700
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2006
Posts: 4,700 |
Ok, mr sniper...
And it's 50, not 100...
|
|
|
|
Joined: Jun 2011
Posts: 10,966 Likes: 74
Campfire Outfitter
|
Campfire Outfitter
Joined: Jun 2011
Posts: 10,966 Likes: 74 |
When you are shooting a long range 600 yard Audette, there are slight changes in wind between shots that may cause some horizontal. You pick the loads in the node based on vertical
Then generally all of the loads in the node are tested to determine which one shoots best. If there is horizontal at 100, there's something wrong
The people wringing their hands over Trump's rhetoric don't know what time it is in America.
|
|
|
|
Joined: May 2003
Posts: 5,793
Campfire Tracker
|
OP
Campfire Tracker
Joined: May 2003
Posts: 5,793 |
When you are shooting a long range 600 yard Audette, there are slight changes in wind between shots that may cause some horizontal. Agreed, but is horizontal never caused by barrel harmonics? You pick the loads in the node based on vertical Why only vertical? John
If my people, who are called by my name, will humble themselves and pray and seek my face and turn from their wicked ways, then I will hear from heaven, and I will forgive their sin and will heal their land. 2 Chronicles 7:14
|
|
|
|
Joined: Jan 2007
Posts: 35,900
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jan 2007
Posts: 35,900 |
Because inconsistencies in ignition and wide velocity spreads will result in vertical dispersion at real distance. that's what's been explained to me. I'm sure Rick will correct me if mistaken. I'm not a match shooter.
The 280 Remington is overbore.
The 7 Rem Mag is over bore.
|
|
|
|
Joined: Jan 2006
Posts: 4,700
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2006
Posts: 4,700 |
Because inconsistencies in ignition and wide velocity spreads will result in vertical dispersion at real distance. that's what's been explained to me. I'm sure Rick will correct me if mistaken. I'm not a match shooter. We can also determine that with a chronograph. My point being that if it's calm (min or no wind), any large spread in horizontal should not be ignored. If it can reasonably be explained by wind, no problem. I've seen folks just use the vertical with no regard for 4" spread at 300yds on a calm day - I don't buy ignoring that.
|
|
|
|
Joined: Jun 2004
Posts: 44,934 Likes: 23
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,934 Likes: 23 |
I also don't recall the OCW method ignoring horizontal. It's more about how insensitive group size and group center are to perturbations in charge weight.
|
|
|
|
Joined: Jan 2007
Posts: 35,900
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jan 2007
Posts: 35,900 |
We can also determine that with a chronograph.
Sure you can. But i would think you'd want to see it on a target as well.
The 280 Remington is overbore.
The 7 Rem Mag is over bore.
|
|
|
|
Joined: Jan 2006
Posts: 4,700
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2006
Posts: 4,700 |
We can also determine that with a chronograph.
Sure you can. But i would think you'd want to see it on a target as well. You can have decent groups at 300yds that have wider velocity swings than I'd choose for my loads. I prefer a chronograph for many reasons.
|
|
|
|
Joined: Jun 2011
Posts: 10,966 Likes: 74
Campfire Outfitter
|
Campfire Outfitter
Joined: Jun 2011
Posts: 10,966 Likes: 74 |
Because inconsistencies in ignition and wide velocity spreads will result in vertical dispersion at real distance. that's what's been explained to me. I'm sure Rick will correct me if mistaken. I'm not a match shooter. Velocity spreads can cause vertical because of the position of the muzzle at bullet exit. No matter how carefully one loads his ammo, there will ALWAYS be velocity differences between shots. Therefore, finding the optimal bullet exit time will reduce vertical stringing. This is the entire reason The Audette Method trumps all other methods. Because inconsistencies in ignition and wide velocity spreads will result in vertical dispersion at real distance. that's what's been explained to me. I'm sure Rick will correct me if mistaken. I'm not a match shooter. We can also determine that with a chronograph. My point being that if it's calm (min or no wind), any large spread in horizontal should not be ignored. If it can reasonably be explained by wind, no problem. I've seen folks just use the vertical with no regard for 4" spread at 300yds on a calm day - I don't buy ignoring that. Using chronograph data to choose a load will not always yield the best long range load, so that statement is incorrect. Take a "fantasy" load that always shoots at 3000 fps. Simply because it performs the best statistically, doesn't mean it will shoot the best on paper. The exit time of the bullet could be when the barrel is moving inconsistently causing poor accuracy and vertical.
The people wringing their hands over Trump's rhetoric don't know what time it is in America.
|
|
|
|
Joined: Jan 2005
Posts: 57,494
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 57,494 |
Yes, someone that gets it. I always go with best paper results, rather than best chrono results.
Chrono has its uses. But not for load selection.
We can keep Larry Root and all his idiotic blabber and user names on here, but we can't get Ralph back..... Whiskey Tango Foxtrot, over....
|
|
|
|
Joined: Aug 2005
Posts: 28,310 Likes: 21
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2005
Posts: 28,310 Likes: 21 |
Yes, someone that gets it. I always go with best paper results, rather than best chrono results.
Chrono has its uses. But not for load selection. I don't know squat about this ladder stuff, but I can't imagine working up loads without a chrono.
It is irrelevant what you think. What matters is the TRUTH.
|
|
|
|
Joined: Jun 2011
Posts: 10,966 Likes: 74
Campfire Outfitter
|
Campfire Outfitter
Joined: Jun 2011
Posts: 10,966 Likes: 74 |
I only use one to check to see if the component combination is giving me the velocity I want.
The people wringing their hands over Trump's rhetoric don't know what time it is in America.
|
|
|
|
Joined: Nov 2003
Posts: 28,964 Likes: 6
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2003
Posts: 28,964 Likes: 6 |
I only use one to check to see if the component combination is giving me the velocity I want. I'm not that sophisticated. I chronograph so I can read about it later. Of course I have little man syndrome so I go for the highest velocity I can get that give the accuracy I desire.
"Only Christ is the fullness of God's revelation." Everyday Hunter
|
|
|
|
Joined: Jan 2007
Posts: 35,900
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jan 2007
Posts: 35,900 |
We can also determine that with a chronograph.
Sure you can. But i would think you'd want to see it on a target as well. You can have decent groups at 300yds that have wider velocity swings than I'd choose for my loads. I prefer a chronograph for many reasons. That's maybe because 300 yards isn't "long range". No one said they don't use a chronograph. use one all the time and have been since the first one's became available. Don't you do more than one thing when you work up a load, like shoot it at distances? As in: 1) chronograph 2) shoot at distance? What is so hard to understand?
Last edited by BobinNH; 02/04/16.
The 280 Remington is overbore.
The 7 Rem Mag is over bore.
|
|
|
|
Joined: Aug 2005
Posts: 28,310 Likes: 21
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2005
Posts: 28,310 Likes: 21 |
I only use one to check to see if the component combination is giving me the velocity I want. Yes, and obviously pressures tag right along with velocity.
It is irrelevant what you think. What matters is the TRUTH.
|
|
|
|
Joined: Mar 2006
Posts: 20,958 Likes: 3
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2006
Posts: 20,958 Likes: 3 |
We can also determine that with a chronograph.
Sure you can. But i would think you'd want to see it on a target as well. Even more so.
By the way, in case you missed it, Jeremiah was a bullfrog.
|
|
|
|
501 members (1234, 1badf350, 17CalFan, 160user, 10Glocks, 10ring1, 45 invisible),
13,495
guests, and
936
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,195,116
Posts18,542,177
Members74,057
|
Most Online21,066 May 26th, 2024
|
|
|
|