Well, I can and have taken a nylon 66 apart and put it back together. Anybody who can do that and still consider it a good rifle ain't too bright. Sure they're tough and go bang on a very regular basis but NOTHING about the design is conducive to good accuracy. NOTHING. Let's see, affix the barrel to a very flexible plastic stock, then affix the rear sight/scope to a stamped sheet steel receiver cover that's not connected to the barrel at all but instead held to the flexible plastic stock with a couple of through screws that allow a bit of slop/shifting between the flexible stock and the reciver cover. Pure design genius !
I own one and I like it. I use the stock iron sights. I used electrical tape to secure the barrel in the stock - otherwise it was minute of old Chevy accuracy - wise. I learned to lubricate it with a soft pencil - never use oil.
The proverbial meeting of the minds right here.
You two dumb fugks wouldn't know a muzzle from a dilldo.
Dave
Whichever one is stuck up your stupid gay azz is the dilldo. I've forgot more about guns than you'll ever know and that is stone cold FACT.
Not nearly as funny as when you claimed to be smart and good looking. Especially so since you already posted pictures of your goofy lookin azz. Now that was hilarious !!!! You liein' sack of shyt you.
Model 60's have never not worked for me or The Nashinator.......
I do way prefer the mags on 10/22's and the availability of aftermarket parts, but I've yet to see a stock 10/22 that's half as accurate as a stock Model 60.
My wife's family loves those model 60's.. I have never owned one or really shot one, but they love 'em.. The only autoloader I own is a 10-22.. It has no sights and a heavier barrel but not a bull.. It is very accurate the little I have shot it.. I need to get it out this spring and see what it will do..
In this area, I don't see many model 60's, but 10-22's are everywhere..
Not nearly as funny as when you claimed to be smart and good looking. Especially so since you already posted pictures of your goofy lookin azz. Now that was hilarious !!!! You liein' sack of shyt you.
I never claimed to be smart.
To state I'm not ridiculously good looking is laughable.
Now tell me more about your being a "gunsmith."
Clark
Originally Posted by Geno67
Trump being classless,tasteless and clueless as usual.
Originally Posted by Judman
Sorry, trump is a no tax payin pile of shiit.
Originally Posted by KSMITH
My young wife decided to play the field and had moved several dudes into my house
I currently make my living building, troubleshooting and repairing 1911 pistols. Previously I did general gunsmithing after apprenticing for 2 years under the former owner of Dan Wesson firearms. Deal with it azzhole. Now how about you ? Gay escort or just professional dumbazz with gay/tranny encounters as a hobby ? Just what do you do besides flap your ignorant gums ?
Why do you have to be such a butt? I mean seriously, the guy comes on here not looking to start an argument but just asking for advice - "I'm not looking for a target gun that shoots itty bitty groups, just something that goes bang when I pull the trigger." - and all you can do is insult him.
Whether the 10/22 or the Marlin 60 is a better rifle is obviously up for debate, I'm sure either one would serve the OP well, but there is no debating the fact that you're acting like a garden variety jerk.
Gunnery, gunnery, gunnery. Hit the target, all else is twaddle!