|
Joined: Nov 2012
Posts: 2,619
Campfire Regular
|
OP
Campfire Regular
Joined: Nov 2012
Posts: 2,619 |
I'm considering picking up a cheap (read discounted) action to stash for a 358 win build down the road. How is the trigger on the M77 Hawkeyes? I have a 90's vintage Mk II, and I wouldn't write home about its trigger.
So, are they serviceable, or should I budget for a replacement? If so, that puts the all in cost of a M77 action around ~$600.
I like the CRF, but the Howa's SAS has available are pretty tempting. Their triggers are nice! I handled one in the store and they're HEAVY. I need to go back and confirm if it was heavy barreled version because it was noticeably heavier than I was expecting.
Chris
|
|
|
|
Joined: Mar 2006
Posts: 14,576 Likes: 8
Campfire Outfitter
|
Campfire Outfitter
Joined: Mar 2006
Posts: 14,576 Likes: 8 |
I've modified and tuned them to be very decent, but they are no Jewel. I think RB makes a replacement that is decent, as well.
|
|
|
|
Joined: Nov 2012
Posts: 2,619
Campfire Regular
|
OP
Campfire Regular
Joined: Nov 2012
Posts: 2,619 |
Timney makes a replacement, but just trying to make sure I'm comparing apples to apples and have my all in price.
|
|
|
|
Joined: Nov 2013
Posts: 28,984 Likes: 26
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2013
Posts: 28,984 Likes: 26 |
My new one is very crisp and best as I can measure, about 3 3/4 pounds, with almost undetectable creep and little overtravel. For some reason, when it breaks, the overtravel doesn't happen until I take it up, if that makes sense. I'll get a lighter spring for it, from Ernie or the hardware store, but it's perfectly usable as is.
My other Hawkeye has the two-stage, which is a peach.
What fresh Hell is this?
|
|
|
|
Joined: Jan 2001
Posts: 29,974 Likes: 11
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2001
Posts: 29,974 Likes: 11 |
With a half hour of time, that trigger can be easily tuned. With patience one can eventually make it conform to his desires.
1Minute
|
|
|
|
Joined: Oct 2004
Posts: 26,677 Likes: 21
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 26,677 Likes: 21 |
I have two Hawkeyes. One is a Hawkeye Predator. It has a good bit of take up then breaks clean relatively light and crisp. The other is a Hawkeye Ultralight. It is a perfect hunting trigger. No slack or take up. Just perfectly crisp.
|
|
|
|
Joined: Aug 2011
Posts: 6,519
Campfire Tracker
|
Campfire Tracker
Joined: Aug 2011
Posts: 6,519 |
I have reworked probably two dozen Mk II and Hawkeye triggers (and I am definitely not a gunsmith) and in all cases ended up with as good a trigger as I could want. Now, as has been said, it takes about thirty to maybe forty-five minutes and no replacement trigger would be any better.
If we live long enough, we all have regrets. But the ones that nag at us the most are the ones in which we know we had a choice.
Doug
|
|
|
|
Joined: Aug 2010
Posts: 48,302 Likes: 37
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,302 Likes: 37 |
The LC6 trigger in the Hawkeye is far and away better than the MKII trigger. Generally a lot easier to "tune". I've done a few myself...
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Jan 2013
Posts: 378
Campfire Member
|
Campfire Member
Joined: Jan 2013
Posts: 378 |
Yes, the LC6 is better than the old MKII's. Not fantastic like the adjustable version in the Hawkeye predators, but a good start. Unless you have two rocks for hands, they are easily worked. I bought a Timney.... once I worked the factory LC6 over, I sold the Timney.
I'm a firm believer in the theory of " If it bleeds, I can kill it".
|
|
|
|
Joined: Feb 2004
Posts: 12,651
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2004
Posts: 12,651 |
When I did my first Ruger trigger I figured the worst that could happen is I would screw up a trigger I didn't like anyway and end up with a Timney.
That was quite a few Ruger triggers ago and I have yet to replace one. M77, MKII, Hawkeye and a couple of revolvers included.
The main thing is to learn about what you need to do and how to do it, then do it carefully.
Coyote Hunter - NRA Patriot Life, NRA Whittington Center Life, GOA, DAD - and I VOTE!
No, I'm not a Ruger bigot - just an unabashed fan of their revolvers, M77's and #1's.
A good .30-06 is a 99% solution.
|
|
|
|
Joined: Aug 2011
Posts: 6,519
Campfire Tracker
|
Campfire Tracker
Joined: Aug 2011
Posts: 6,519 |
"The main thing is to learn about what you need to do and how to do it, then to do it carefully" quote.
And slowly. I re-install and check my work a lot while doing trigger jobs. As the old saying goes.....it's easy to take metal off, but damn impossible to put it back. I learned that on a Redhawk a long time ago. Holds especially true on rifle triggers.
If we live long enough, we all have regrets. But the ones that nag at us the most are the ones in which we know we had a choice.
Doug
|
|
|
|
Joined: Oct 2013
Posts: 18,970 Likes: 5
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2013
Posts: 18,970 Likes: 5 |
"The main thing is to learn about what you need to do and how to do it, then to do it carefully" quote.
And slowly. I re-install and check my work a lot while doing trigger jobs. As the old saying goes.....it's easy to take metal off, but damn impossible to put it back. I learned that on a Redhawk a long time ago. Holds especially true on rifle triggers. I did a Savage several years back, pre-Accutrigger, about 8 hours with a very fine stone and super fine adjustments on the screws. Ended up with a 2# trigger that broke like glass and wouldn't trip when bounced on the floor. Slow and steady with minimal material removal along with reassembly is the way to go.
The last time that bear ate a lawyer he had the runs for 33 days!
|
|
|
|
Joined: Feb 2004
Posts: 12,651
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2004
Posts: 12,651 |
I agree that slow important. When I am working a trigger I'll reassemble and test as many times as necessary to get the desired result but 2-3 is the norm for the Rugers. Went a different way on one of my ARs. After being cautioned not to even attempt to work on it by knowledgeable shooters here at the fire, I proceeded under the assumption that the worst I could do is further screw up a trigger that truly sucked to begin with. And further screw it up I did. Got a little aggressive and what I ended up with, because I didn't fully understand the geometry, was a rifle that would fire when the trigger was pulled and again when it was released. It was much smoother, lighter and crisper, though. Ended up replacing that trigger - a happy ending as far as I'm concerned.
Coyote Hunter - NRA Patriot Life, NRA Whittington Center Life, GOA, DAD - and I VOTE!
No, I'm not a Ruger bigot - just an unabashed fan of their revolvers, M77's and #1's.
A good .30-06 is a 99% solution.
|
|
|
|
Joined: Aug 2010
Posts: 48,302 Likes: 37
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,302 Likes: 37 |
I agree that slow important. When I am working a trigger I'll reassemble and test as many times as necessary to get the desired result but 2-3 is the norm for the Rugers. Went a different way on one of my ARs. After being cautioned not to even attempt to work on it by knowledgeable shooters here at the fire, I proceeded under the assumption that the worst I could do is further screw up a trigger that truly sucked to begin with. And further screw it up I did. Got a little aggressive and what I ended up with, because I didn't fully understand the geometry, was a rifle that would fire when the trigger was pulled and again when it was released. It was much smoother, lighter and crisper, though. Ended up replacing that trigger - a happy ending as far as I'm concerned. Should have called that one your double tap trigger job...
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
574 members (257 roberts, 257Bob, 10gaugemag, 222ND, 160user, 21, 49 invisible),
2,653
guests, and
1,294
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,368
Posts18,527,357
Members74,031
|
Most Online11,491 Jul 7th, 2023
|
|
|
|