|
Joined: Aug 2004
Posts: 69,652 Likes: 14
Campfire Kahuna
|
OP
Campfire Kahuna
Joined: Aug 2004
Posts: 69,652 Likes: 14 |
Thankee, Kindly!
Molɔ̀ːn Labé Skýla!
|
|
|
|
Joined: Aug 2003
Posts: 39,117 Likes: 23
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2003
Posts: 39,117 Likes: 23 |
Charlie Sisk once said someone repaired a leaking radiator in a tractor with Accraglass...
Be curious if it would work on a poly tank and likely, you have some around....
Me
|
|
|
|
Joined: Jan 2001
Posts: 21,317
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2001
Posts: 21,317 |
Poly's slick stuff. There may be some epoxies that stick to it, but you're much better off using a welder. I got a basic welder with fillers from Urethane Supply company. I've used it for repairing a fuel tank, body parts on a snowmobile and fenders on my boat trailer.
|
|
|
|
Joined: Jan 2005
Posts: 53,303
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 53,303 |
Poly's slick stuff. There may be some epoxies that stick to it, but you're much better off using a welder. I got a basic welder with fillers from Urethane Supply company. I've used it for repairing a fuel tank, body parts on a snowmobile and fenders on my boat trailer. Agree 110 % Some of the potable water tanks are joined with ultrasonic welding and to date have defeated my every effort to get a sound, long lived repair,...NOTHING will stick to em'. Robbing a non critical part, and hot knifing a patch has worked a time or two. I do think the fuel tanks are a little more forgiving , but you need one of the classic "Hi-Solv" plastic welders that will get an "Etch" right off the bat,...the stuff they "Ban" in Kalifornicatia. Watch the fumes, or lose brain and liver function. GTC
Member, Clan of the Border Rats -- “Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it.”- Mark Twain
|
|
|
|
Joined: Jan 2003
Posts: 5,202
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2003
Posts: 5,202 |
Without a pilot hole, it's more than likely that down line one will find stress cracks radiating outward from around the liberal's suggested FUBAR.
I think the one he wrote about scopes not needing to be level was the prime classic though. Perhaps he wrote that for his MM degree thesis. A "self-tapping screw" drills it's own pilot hole. You should stick to things you know about, like drinking and acting like an ass.
One shot, one kill........ It saves a lot of ammo!
|
|
|
|
Joined: Jan 2005
Posts: 53,303
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 53,303 |
To SMALL a pilot hole,...for some densities of plastic,....and WILL cause radial stress cracks.
Folks, don't mistake plastic for sheet metal, they have pretty unique and individual mechanical characteristics and properties.
GTC
Member, Clan of the Border Rats -- “Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it.”- Mark Twain
|
|
|
|
Joined: Aug 2009
Posts: 9,920 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Aug 2009
Posts: 9,920 Likes: 1 |
Cross, don't ask him how to fix a crack in cast iron. I bet it doesn't start with drilling a hole
|
|
|
|
Joined: Jan 2003
Posts: 5,202
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2003
Posts: 5,202 |
Cross, don't ask him how to fix a crack in cast iron. I bet it doesn't start with drilling a hole You'd lose that bet. Some want to nitpick over the size of a hole by acting like a big A-hole.
One shot, one kill........ It saves a lot of ammo!
|
|
|
|
Joined: Nov 2011
Posts: 4,959 Likes: 2
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2011
Posts: 4,959 Likes: 2 |
I have a 2500 gallon plastic tank on my water truck. It cracked in a couple places near the top. Got one of those plastic welding kits with the plastic rod. Drilled a hole at each end of the crack and welded it up per the instructions. Didn't work worth a schidt. Crack opened up again. Wouldn't recommend that solution to anyone except a liberal!
|
|
|
|
Joined: Jan 2001
Posts: 21,317
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2001
Posts: 21,317 |
If the plastic is degraded due to UV exposure the welding isn't going to be a solution. Just like a rusted out steel tank can't be made right by burning rods.
|
|
|
|
Joined: Jan 2005
Posts: 53,303
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 53,303 |
I have a 2500 gallon plastic tank on my water truck. It cracked in a couple places near the top. Got one of those plastic welding kits with the plastic rod. Drilled a hole at each end of the crack and welded it up per the instructions. Didn't work worth a schidt. Crack opened up again. Wouldn't recommend that solution to anyone except a liberal! Don, did you ever get that thing patched ? Got some stuff here that sticks like the proverbial schidt to a blanket,...and most ANY plastic,...until I tried patching the potable water tank out of a gal friends live aboard slant. I did come up with a method of patching it,...but gonna keep it under my old beat up hat. GTC
Member, Clan of the Border Rats -- “Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it.”- Mark Twain
|
|
|
|
Joined: Nov 2011
Posts: 4,959 Likes: 2
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2011
Posts: 4,959 Likes: 2 |
Never did get the tank fixed. I just don't fill it up all the way. The cracks could be from UV. We have some of that here in Arizona but they started less than a year after I got it. Have a feeling it is due to the way I strapped it down to the bed of the truck.
|
|
|
|
Joined: Mar 2007
Posts: 9,209 Likes: 3
Campfire Outfitter
|
Campfire Outfitter
Joined: Mar 2007
Posts: 9,209 Likes: 3 |
That tank is likely hdpe. Look into fusion for hdpe. It bonds around 400*f. If using a plastic welder on plastic that can "heat sink" due to its mass, throw some heat at it before the weld.
I would not buy something that runs on any kind of primer given the possibility of primer shortages and even regulations. In fact, why not buy a flintlock? Really. Rocks aren't going away anytime soon.
|
|
|
|
Joined: Aug 2004
Posts: 69,652 Likes: 14
Campfire Kahuna
|
OP
Campfire Kahuna
Joined: Aug 2004
Posts: 69,652 Likes: 14 |
As of now the problem solved itself.
Not leaking anymore. I suspect that the wood causing the small leak had sealed the hole to the point it's not even dripping.
I'll leave it be until it gets my attention again.
Molɔ̀ːn Labé Skýla!
|
|
|
|
Joined: Jan 2012
Posts: 6,784
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2012
Posts: 6,784 |
Barry, rig up your shop vac so's to pull a vacuum in the tank (in other words, plug any vents) Duct tape, Saran Wrap, whatever.
THAN do your drilling and fit your sheet metal screw / plug. You'll note that their will be little if any tendency for the plug to "weep". Leave the vacuum on and CLEAN the repair area with acetone / MEK. Devcon Plastic Welder would be my first choice ,....BUT it doesn't always stick to every plastic,....ABS in particular.
Try the vacuum stunt next time you have to disconnect / change out a hose from a large tank or sump, and draining is just not an option.
GTC Shop vac and gasoline is a deadly combination....unless they make an intrincly safe shop vac....
|
|
|
|
Joined: Jan 2005
Posts: 53,303
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 53,303 |
Barry, rig up your shop vac so's to pull a vacuum in the tank (in other words, plug any vents) Duct tape, Saran Wrap, whatever.
THAN do your drilling and fit your sheet metal screw / plug. You'll note that their will be little if any tendency for the plug to "weep". Leave the vacuum on and CLEAN the repair area with acetone / MEK. Devcon Plastic Welder would be my first choice ,....BUT it doesn't always stick to every plastic,....ABS in particular.
Try the vacuum stunt next time you have to disconnect / change out a hose from a large tank or sump, and draining is just not an option.
GTC Shop vac and gasoline is a deadly combination....unless they make an intrincly safe shop vac.... W A T E R,...I believe that's what the tank discussed contained ? Diesel ?,...No problems , thus far ( but point taken) Hydraulic Sumps ?,...I'll continue doing it with plain old shop vacs. Thanks for pointing out the Gasoline hazard ! GTC
Member, Clan of the Border Rats -- “Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it.”- Mark Twain
|
|
|
|
Joined: Jan 2001
Posts: 7,480
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2001
Posts: 7,480 |
Plastic welder would get my vote. Those plastic tanks flex more than you'd think with varying amounts of fuel in them, and temp changes. Epoxies, unless they are equally supple,, would peel after a while.
To anger a conservative, lie to him. To annoy a liberal, tell him the truth.
Promoted to Turdlike status 03/17/12
|
|
|
|
Joined: Apr 2011
Posts: 151,716 Likes: 14
Campfire Savant
|
Campfire Savant
Joined: Apr 2011
Posts: 151,716 Likes: 14 |
Fiber glass , pipe repair kit
|
|
|
|
581 members (1badf350, 1lesfox, 1936M71, 10gaugemag, 12344mag, 01Foreman400, 55 invisible),
2,514
guests, and
1,490
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,194
Posts18,485,002
Members73,966
|
Most Online11,491 Jul 7th, 2023
|
|
|
|