Home Forums Hunting & Shooting Long Range Hunting 7mm heavy projectile recommendation for LR elk

A quick 1000 words:

30 STW with 155 Skinner seated to max OEM L/A 700 COAL(which tends to average 3.685") on left of OEM 'box. 30 STW(full length H&H),next to a 7mm RemMag empty(which is a 2.5" H&H) on it's right. Boolits in ascending length to left of loaded 30 STW: .308" 155 Skinner,.284" 162 ELD,.284" 180 ELD and lastly .284" 190 A-Tip. Hint.



Now "throating" sounds fhuqking good,until you nestle schit in said confines with STW case length. HINT.



So if only to come full circle,the 7mm RemMag in OEM issued guise,is a tough NO Bullschit bitch to whoop. It'll Smooch,nestle and stabilize the 180 ELD at Low Tide. I'm ALWAYS happy to trade away case length and some capacity,to eek more BC. Which is why in a nutshell a 22-250AI/224 Speedmire STOMPS a Swift. Why a Seex Kreed STOMPS a 6mm Rem....yada,yada,yada. Bullets matter wayyyyyyyyy more than headstamps and you gotta align RPM,COAL and throat geometry to ring the bell. So for a STW or Ultra to play in like latitude,you'd need to increase COAL the .350" case length difference,from a 7mm RemMag,which would require a 4.035" COAL latitude mag box. Hint.

Pass the easy win and hold The Fhuqking Fluff. Hint.

You've been led to water....................

Stick plugging a belted case that holds more than 50 grains of powder! WTH!

If you do not listen to Stick, you are one very dub MF...

Simple trumps all

I learned the hard way, window licker and all!

Merry Christmas Stick

Keith

PS. What is a 155 skinner? dumb [bleep] abounds here.... Start at the start...I have it all to learn after 40 years of this stuff...Lathes and blanks in the garage abound!

155 scenar