24hourcampfire.com
24hourcampfire.com
-->
Previous Thread
Next Thread
Print Thread
Hop To
Joined: Apr 2007
Posts: 117
B
ba_50 Offline OP
Campfire Member
OP Offline
Campfire Member
B
Joined: Apr 2007
Posts: 117
The fender washer set up is a pain. Would a nut or 3" rebar piece using JB be strong enough? Thanks.

GB1

Joined: Aug 2003
Posts: 19,822
A
Campfire Ranger
Offline
Campfire Ranger
A
Joined: Aug 2003
Posts: 19,822
Using 1/2" rebar as the body of the stake? It probably would if you clean both surfaces really well and were using a nut and leaving ~ 1/4" rebar sticking up out of the nut so you could peen over the end of the rebar when you drive it, thus giving more security. If I were to try that, I'd make sure it was NOT quick-set JB and would let it cure for at least a couple of days. I'd also cut off the other end of the stake at an angle to make it easier to drive into extremely hard ground.

I use stakes at least 75% of the time where I trap due to the lack of vegetation to use a drag.
To me, welding a large nut on the end makes for a secure, long lasting stake that I don't have to worry about.

There are some really inexpensive, small wire-feed welders that run off of 110/120VAC and are set up to strictly use flux-core wire, giving you another useful tool in your shop and will pay for itself many times over for home/hobby type stuff.

Ed


"Not in an open forum, where truth has less value than opinions, where all opinions are equally welcome regardless of their origins, rationale, inanity, or truth, where opinions are neither of equal value nor decisive." Ken Howell



Joined: Feb 2010
Posts: 1,571
T
Campfire Regular
Online Content
Campfire Regular
T
Joined: Feb 2010
Posts: 1,571
I've made stakes from 1/2" rebar and then slid a nut on the rebar leaving an inch or so protruding... heat it red hot and then hammer the nut flat. I've never had one fail.


molɔ̀ːn labé skýla
Joined: Apr 2017
Posts: 2,915
4
Campfire Regular
Offline
Campfire Regular
4
Joined: Apr 2017
Posts: 2,915
I would use the epoxy that you use to put all thread in concrete if it ain't welded

Joined: Nov 2006
Posts: 10,794
C
Campfire Outfitter
Offline
Campfire Outfitter
C
Joined: Nov 2006
Posts: 10,794
Rebar is soft enough that, if you have a good vise and a big ball peen hammer, you can flatten out one end so a properly sized fender washer won’t get over it. You can the drill your fender washers near one edge and “s” hook your chain (which you should shorten to 6”) to the fender washer. Drop a stake, so headed, though the washer and there you are.

Personally, I gave up rebar for cable “stakes” a long time ago. They’re less weight and way more secure. A big northeastern coyote can rear up high enough and strong enough to pull a stake unless it’s extra long, and sometimes you can’t get an extra long stake in far enough in rocky dirt. If you have to angle it, you’ve effectively reduced the length and made a pull out possible. If you double stake, you’ve lost the swiveling capability. Also, with a cable, if some dirt bag steals your catch, at least they won’t get your trap unless they’re carrying cable cutters.


Mathew 22: 37-39



IC B2


Moderated by  RickBin 

Link Copied to Clipboard
AX24

535 members (1936M71, 1234, 007FJ, 17CalFan, 01Foreman400, 63 invisible), 2,520 guests, and 1,338 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums81
Topics1,191,556
Posts18,473,040
Members73,940
Most Online11,491
Jul 7th, 2023


 


Fish & Game Departments | Solunar Tables | Mission Statement | Privacy Policy | Contact Us | DMCA
Hunting | Fishing | Camping | Backpacking | Reloading | Campfire Forums | Gear Shop
Copyright © 2000-2024 24hourcampfire.com, Inc. All Rights Reserved.



Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.3.33 Page Time: 0.131s Queries: 14 (0.003s) Memory: 0.8068 MB (Peak: 0.8509 MB) Data Comp: Zlib Server Time: 2024-04-27 19:42:11 UTC
Valid HTML 5 and Valid CSS