While my meager collection pales by comparison to some of the beauties shown in this thread. I have acquired a couple interesting examples.
First is a 700 MagPul in 260 Rem 22 inch barrel w/ 8 inch twist. Setup at the factory with the MagPul stock and mag. I switched it out to an Accurate binderless mag and added a Trigger tech at 2.5 lb. The scope is an FF II 3.5-14x42. As I have several rifles in the same chambering, the tape is coded to the ammo boxes. Burris EX Tact bases with signature rings.
700 5R in 260 Rem 24 in barrel with 8 inch twist and factory HS Precision stock. It originally had BDL bottom metal which I replaced with AICS and accurate binderless mag. Trigger Tech at 2.5 lb. 3.5-10 VX-3 CDS on Ex Tact bases and Signature rings.
700 ADL synthetic. originally in 243. I found the stock in the raw at my FFL and finished it. Then it got the BDL bottom metal from the 5R. And finally a SS 7mm-08 barrel purchased from the 'Fire. Trigger Tech at 2.5 lb. VX 2 3-9x40 in Ex Tact bases with Signature rings.
Okay, now I am going to cheat a bit.
722 in 244 Rem. FF II 3.5-14x42 in Talley LW Purchased from the Campfire.
Model 7 in 6mm-284Win with Trigger Tech at 2.5 lb. VX 2 3-9x40 in Talley LW.
And finally a 788 in 6MM Rem with a Bushnell 4200 3-9x40 in whatever rings were on the rifle when we bought it.