Home Forums Hunting & Shooting Hunting Optics Howa Mini action in 6.5 Grendel

Honey Bitch,

CZ COAL is fhuqking HILARIOUS. Hint.






Pardon my simply shooting it all and then some. Hint.

Fhuqking LAUGHING!..............

Looks like Sweet Pea has tried about every combination.
LOL

None worked. Haha

Operator error. Hint

JO V.2's have no equal. Hint.













You Whining Brokedicks "get" to read about it. Hint.

Fhuqking LAUGHING!..............

No. I bought that TG and mag from CZ directly . It is out of stock right now. $65.00 w/o the mag.

https://shop.cz-usa.com/catalogsearch/result/?q=trigger+guard

Latest configuration of my money pit

Previous config

Dinny,

I'm looking at pretty much the exact same B&C stock for a Howa mini here. Mind if I ask what you think or for any other pictures, por favor?

Mine is cut down to 16 1/4 and the little redfield 2-7 is perfect for me. Rides just right in my scabbard.

What’s a good length to shorten the barrel? Mine is 22” and with Stockys carbon stock the rifle is really barrel heavy. I’m thinking 3” minimum, maybe 4 or 5 need to come off.

I cut mine to 18.5 and points and holds very well, balance is front action screw give or take optic/bottom end choices.

I'm getting 2437 fps out of my 16 1/4" with 123gr bullets and XBR 8208 for reference.

That's sweet, that's what I'm leaning to...did you cut it yourself?

Yep. Hacksaw then a Brownells crowning tool.

Thanks

Sorry, it seems as though a few questions have been left unanswered for a while.

My stock is a Pendleton Custom Stock made by Oregunsmithing. It weighs 20oz with bedding and thin steel pillars. It was supposed to be drop in ready but it wasn't fitting as well as I would prefer. It's light, strong, and I really like it.

Thanks Dinny.

Did you notice any change in accuracy (positive or negative) after cutting your barrel?

Thanks.

Frank

Thanks Dinny! I appreciate it!

No change in accuracy when I chopped the barrel. It shot about 1 1/4" groups at 100 yds with my handloads before and after. When I swapped the plastic trigger guard and box mag for the Oregunsmithing metal unit it improved to just under 1" groups using the same load. Plenty accurate for my purpose so I called it good and never explored other loads.