|
|
Joined: Feb 2004
Posts: 6,037 Likes: 2
Campfire Tracker
|
OP
Campfire Tracker
Joined: Feb 2004
Posts: 6,037 Likes: 2 |
Pulled apart my model 7 to drop a in a new trigger and noticed the bedding is cracked...is this a problem?
|
|
|
|
Joined: Feb 2015
Posts: 433 Likes: 1
Campfire Member
|
Campfire Member
Joined: Feb 2015
Posts: 433 Likes: 1 |
If the stock isn’t cracked too, yes.
|
|
|
|
Joined: Mar 2011
Posts: 1,238
Campfire Regular
|
Campfire Regular
Joined: Mar 2011
Posts: 1,238 |
It's difficult to see the details, but it looks like the surface in the void is glossy. If that's the case, it looks like an air void when it was bedded.
|
|
|
|
Joined: Mar 2011
Posts: 1,238
Campfire Regular
|
Campfire Regular
Joined: Mar 2011
Posts: 1,238 |
It's difficult to see the details, but it looks like the surface in the void is glossy. If that's the case, it looks like an air void when it was bedded.
|
|
|
|
Joined: Feb 2001
Posts: 50,646 Likes: 2
Campfire Kahuna
|
Campfire Kahuna
Joined: Feb 2001
Posts: 50,646 Likes: 2 |
I agree completely with Bang Pop. Epoxy should be added to the bedding area in "lifts" which are smooth and bubble-free. Several lifts for a foreend, minimum.
Easy fix though. Grind out the crack and a bit of surrounding epoxy/stock. Then work the new epoxy into the ground out area until it is full enough to bed the barrel properly.
Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
|
|
|
|
Joined: Mar 2009
Posts: 2,802 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Mar 2009
Posts: 2,802 Likes: 1 |
Is the barrel free floated? Is the action area crack free?
NRA Endowed Patron Life Benefactor GOA Life Member TSRA Life Member NSCA Life Member
|
|
|
|
Joined: Jan 2003
Posts: 3,460 Likes: 13
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2003
Posts: 3,460 Likes: 13 |
Pretty easy repair. I use a thin two part epoxy for repairs like that. -Al
Forbidden Zoner
|
|
|
|
Joined: Feb 2015
Posts: 433 Likes: 1
Campfire Member
|
Campfire Member
Joined: Feb 2015
Posts: 433 Likes: 1 |
Hopefully didn’t occur when the barreled action was separated from the stock.
|
|
|
|
Joined: Jan 2003
Posts: 3,460 Likes: 13
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2003
Posts: 3,460 Likes: 13 |
Hopefully didn’t occur when the barreled action was separated from the stock. Which is why I use an action jack to lift the barreled action straight up and out of fresh bedding. 😉 -Al
Forbidden Zoner
|
|
|
|
100 members (akpls, 300_savage, 2500HD, 79S, 24HourCampFireGuy50, 12 invisible),
1,378
guests, and
852
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,449
Posts18,507,926
Members74,002
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|